RELATED PRODUCTS: Thermold 30 Rd Magazine for the Ruger® Mini-14®, Thermold 26 Rd Magazine for the Ruger® Mini-Thirty®, Swivel Stud QD Adapter
PLEASE NOTE THAT DUE TO EXTREMELY HIGH DEMAND, SHIPMENT OF THIS PRODUCT WILL BE DELAYED BY 5 MONTHS.
When your order is ready to ship, we will send you an e-mail requesting you to call us to confirm your ship-to and bill-to addresses, plus get your final payment information again. Be sure to provide a valid email address and make sure your spam filter allows emails from samson-mfg.com. If we cannot reach you, you will be skipped over until you contact us.
Orders are processed and shipped in the order that they are received, and will show as ‘pending’ until ready to ship. Your credit card is not charged until your folding stock is shipped.
Please review our A-TM FAQ for additional information. While we work to decrease lead time and expedite your order, we thank you for your patience.
WARNING: The A-TM Folding Stock comes assembled and ready to drop-in your original Ruger® Mini-14® or Mini Thirty® receiver, bolt assembly and barrel. Any attempt to disassemble the A-TM Folding Stock by the customer will void the warranty.
The A-TM Folding Stock is the perfect complement to your Ruger® Mini-14®. Using the original molds and wood from the original stock maker, this is not a copy or a reproduction. The A-TM Folding Stock is compatible with most Ruger® Mini-14® and Ruger® Mini Thirty® models
NOTE: The Folding Stock is designed for Mini-14® rifles with serial numbers 181-xxxxx and higher and Mini Thirty® rifles with serial numbers 580-xxxxx and higher.
(Mini-14® and/or Mini Thirty®, heat shield, sights, sling swivel, and magzine are NOT included)
A-TM Installation Instructions:
For answers to frequently asked questions, click on the FAQ tab.
- Stainless Steel construction
- Walnut stock
- Drop in fit
- Designed for Mini-14® rifles with serial numbers 181-xxxxx and higher, and Mini Thirty® rifles with serial numbers 580-xxxxx and higher
- Made in USA
(Folding Stock Only):
- Length: 19.5”
- Height: 5.5”
- Width: 3.5”
- Weight: 4.2 lbs.
- Length: 29.0”
- Height: 5.5”
- Width: 2.25”
- Weight: 4.2 lbs.
Length of Pull: 13.5"
Approximate overall length of extended A-TM Folding Stock and Mini-14® with an 18-inch barrel: 38"
Due to the high demand for the A-TM Folding Stock, expect delays in shipping your order. All orders will be processed on a first come, first served basis. Credit card/debit card charges may be placed on hold by your bank for up to 30 days.
Ruger® Mini-14® and Mini Thirty® are trademarks of Sturm, Ruger & Co., Inc. Samson Manufacturing Corp. is a manufacturer of firearms parts and accessories and is not associated with or sponsored by Ruger.
A-TM Folding Stock FAQ
There are multiple small/minor as well as larger parts that make up the stock. Once put together they are not meant to be taken apart – thus voiding the warranty if taken apart. We have highly trained individuals here that do the assembly, using devices made specifically for this assembly process.
Q: When will my credit card be charged?
A: A hold may be placed on your card depending on your bank. When we are ready to ship your order, we may need to contact you to get your credit card information in order to process your order.
Q: What kind of wood is used and how is it finished?
A: We are using walnut supplied by Ruger. The walnut has been sealed, plus finished with 2 coats of polyurethane to bring out the natural beauty and uniqueness of the wood. Due to the nature of walnut, expect variations in both color and grain from stock to stock. Walnut, like most natural woods, will darken over time and develop a deep lustrous patina.
Returns will not be accepted, or exchanges approved based on the color alone.
Q: Are the A-TM and B-TM folding stocks legal in my state?
A: There are a myriad of firearms laws around our nation, unfortunately. As such, Samson Manufacturing does not provide legal advice to anyone regarding any state's firearms laws. It would be up to you to learn and understand your state's firearm and firearm products laws. We are not in a position to offer any legal advice.
Q: Will it fit my rifle?
A: The A-TM stock will fit most models and calibers of the RUGER® Mini-14® and Mini Thirty® other than the AC-556 (see below). May not be compatible with the 180-series Mini-14®.
Q: Will my aftermarket magazine fit?
A: Some aftermarket magazines may not fit, therefore we recommend using a Ruger® factory magazine for best results.
Q: How close is it to the original?
A: Cast components are coming off the original Ruger molds and wood is also supplied by Ruger. New production wood is Walnut instead of the original Birch, and pistol grips are Polymer where the originals were Bakelite. The retention screw uses an Allen-head instead of the original slotted head design. Other than that, it is the original stock. The A-TM stock has a length of pull of 13.5” just like the original.
Q: When will it be available?
A: Initial orders began shipping in March 2020. Due to the extremely high demand, delivery will be delayed by several months. Orders are shipping in the order that they are received, and will show as ‘pending’ until ready to ship. While we work to decrease lead time and expedite your order, we thank you for your patience.
Q: Can I get it in Blue?
A: You can get an A-TM stock in any color you want as long as it is Stainless. In other words...NO.
Q: Is it available outside the U.S.?
A: Due to pending changes in export regulations, the A-TM may eventually be available without the need for an export license.
An export license is currently required to ship outside of the U.S. (this means you, Canada). We are working with our International distributors on the possibility of selling outside the U.S. We have no plans to offer sales to International customers through our website.
If/when additional information becomes available, we will add it to our FAQ.
Q: Will it be available with the AC-556 selector switch cut?
A: We expect to have an AC-556 compatible model available as a Samson exclusive later this year. Stay tuned for updates as they become available.
Q: How will the A-TM Stock affect the Classification of my rifle?
A: Installing this stock on your Mini-14® or Mini Thirty® rifle could create a rifle configuration that is illegal in some states. Before purchase or installation, verify with local law enforcement that feature-based restrictions in your state or locale do not prohibit installation.It is the customers responsibility to determine if the addition of the A-TM stock will change the legal status of their rifle in the jurisdiction in which they reside. We make gun parts, not legal determinations. If you live in a freedom-challenged part of the world, please check your federal, state and local ordinances before purchasing.
Customer Ratings & Reviews
Would recommend this product.
Would recommend this product.
Date: August 31, 2021
Beautiful Form and Function. Really kicks my Mini-14 up a notch
one word... INCREDIBLE!
Date: August 25, 2021
I have had my ranch rifle for years, it is my one and only rifle that i use for all hunting and target. I have always wanted a folding stock which makes it so much easier to carry and transport. Unfortunately Ruger stopped manufacturing the beautiful folding wooden stock. I was thrilled when Samson stepped up to the plate and started manufacturing these classic folding stocks again, with such high quality materials and workmanship. I would recommend this hands down and i believe that anyone who realizes the Ruger mini14 is an awesome rifle, would want this stork on it!
A-TM Folding Stock Amazing Stock
Location: Hamilton, Montana
Date: July 12, 2021
I love the fit and function of the new Samson Mini-14 stock. It is a high quality factory style stock that is flawless. Obviously a very well designed and professionally manufactured stock with precision fit and finish. Samson really hit the ball out fo the park with this stock!
Date: June 24, 2021
I ordered the a-tm folding stock for my mini-14 waited four months for delivery not too bad.UPS was a little bit slower it took one week from New Hampshire to North Carolina.
Excellent fit and the wood is now darker than the originals looks amazing
Folding stock review
Date: June 9, 2021
I've purchased the stock for the mini 14 and for the 10-22 . It was about six months to get the mini14,3weeks for the 10-22. Well worth the wait. Top notch quality. Had one in the 80s on a mini 14,just like I remembered. Keep up the good work Samson!
This is a masterpiece
Date: May 12, 2021
This is a beautiful addition to my 186 series Mini-14. It came well packaged, and fits like a glove. I did not need to prepare any tools for filing or fitting. Only downside is, I had to wait for this to be made, but after receiving the actual product, I believe the wait was warranted.
Mini 14 A-tm
Lt. J. Wyatt
Location: Shawnee, Oklahoma
Date: Apr23l 30, 2021
Absolutely amazing and perfect fit and I mean PERFECT. My Mini 14 is a brand spanking new 584- series and it slid right in without a single hiccup. There’s always a lot of talk about what series rifles will fit and which ones won’t so for an absolute assurance in regards to the fresh out the factory new 584 series I can tell ya mine dropped right in slicker than snot and fits nice and tight so if your buying a new Mini in order to get this stock and build an old 80’s esk rifle like the A-Team used rest assured as someone who did just that IT WORKS!!! The only thing I have left to do is unfortunately my rifle wasn’t the “Tactical” model that came with the factory flash hider but I bought the factory flash hider in order to rectify that situation but now I have to find a gunsmith somewhere to have my barrel shortened and threaded 1/2x28 to fit the flash hider as well as my AAC Ranger suppressor. If anyone knows of someone that does Mini 14’s shoot me an email at email@example.com please. I’m not having a lot of luck finding someone who has the tools to pull and re-install Mini 14 barrel’s. Back to my original purpose here you will have ZERO complaint’s with this Sampson stock and being an idiot who had an original GB that came factory with this stock and traded it, this Sampson stock is more solid and better built than the original version and you’ll know it at first sight and touch. When you order this stock you will likely be told you will be waiting 6 to 9 months before your order comes up like I was told. However no guarantee’s but I can tell you I got mine in about 5 months and IMHO it ABSOLUTELY was worth every single second and every single dime. If you wanted one as bad as me you WILL NOT regret it. I absolutely love mine and you won’t be seeing mine come up for sale. Others will likely disagree with me but I’d take this Mini 14 over any AR15 model in existence all day every day. This Mini 14 with the wood and stainless folding stock just has CLASS and it’s just a BEAUTIFUL piece of American heritage and history. I probably would have traded 3 of my AR’s for this one rifle any day all day I just LOVE this rifle not to mention it’s stainless so it’s a LOT easier to clean compared to blue steel. Get this thing you’re never going to regret it. God Bless you all and stay safe and stay healthy.
A work of art
Date: March 27, 2021
I can’t say enough about this stock. It’s a dream come true to have this stock on my mini. The color on the wood was not as light as others have mentioned. It’s about the same color as my old 10/22 factory stock. I’m very happy with it. Great product!!
VERY Nice Stock. I'm Impressed.
Date: March 10, 2021
Wow! I am very impressed. I ordered this from ShopRuger on Christmas Eve 2020 knowing that it probably wouldn't get here until around May 2021 because of the super high demand. But, I received it yesterday, March 10th. This stock is a very nice, high quality item. Fit is perfect, fits the receiver like a glove. The mechanism on the folder works perfectly, with just the right amount of play while still being precise. I was somewhat worried that the wood stain would be too light as that was a complaint from others. However, they must have heard the complaints because this one is the exact same color as my regular wood stock, which looks great. The A-TM stock is walnut instead of birch like the factory stock, both are nice woods. I weighed both stocks and the A-TM came out six ounces heavier than the factory wood stock, which isn't bad. I was hoping I would luck out and receive one with nice flamed out grain but that didn't happen, which is fine. LOL. It was well worth the wait of two and a half months. Thank you Samson, you all did a GREAT job!
Location: Western North Carolina
Date: March 3, 2021
This product was long overdue..............Thank you Samson for having the insight to know what gun owners (especially Mini 14/30 owners) wanted.
these folding stocks are nicer than the originals.......... I give it a 9.7 out of 10 stars. The only thing that would make it a perfect 10?........ Black walnut or Turkish Walnut!!!!!! or at least having that option. Thank you!
Date: February 17, 2021
Very easy to install And looks great. Have bought two to install on a mini 14 and a mini 30. Took less than five minutes to install.
Location: Hamilton, Montana
Date: February 12, 2021
The New A-TM Mini 14 stock is simply perfect! This stock is of the highest quality possible and functions flawlessly. Beautiful fit and finish!
Date: January 29, 2021
A summer purchase turned into an unintentional birthday gift for me. It was well worth the wait.
Ruger side folder
Date: January 6, 2021
Just got this stock in after a six month wait and it was well worth it! My ruger mini 14 ranch rifle fit right in and all the parts fit tightly, no rattling. It even has a sling stud on it for east carry. I grew up watching the A-Team and have wanted one of these forever. Samson manufacturing did not disappoint!
Feels like old times.
Location: Murphy, NC
Date: December 11, 2020
My stock finally arrived this week and it's all I imagined. Work is flawless, and everything fit tight and just like you'd want. Five minutes after I opened the box, my tactical mini had a whole new character. Only difference I can tell from the one I had in the '80s is this one is better. My original was "hardwood" and this one is Walnut. Think I might order another.
mini 14 stock
Location: fort myers fl
Date: December 6, 2020
this stock is so close the the real one from the 70's, Ruger is selling them. don't sweat the wood it will darken up with use and handling. I would like to see a blued version soon.
Location: Dallas, TX
Date: November 21, 2020
This stock fits like a glove and looks and performs just like the original - maybe even a little better! Want to make your mini look awesome? Get this stock! Well worth the wait to get this - you owe it to your mini to give it the A-Team touch!
I was wrong
Date: October 25, 2020
I left a review and said my stock did not have a Sampson name on it,it does almost didnt see it.
A-TM Folding Stock for Mini-14
Hubert the Corruptor
Location: Cyril, Oklahoma
Date: October 14, 2020
I received my stock a couple weeks ago and I am so pleased with it I have ordered two more stocks. The stock locks-up tight whether folded or extended and is just as I remember them to be from the 'A-Team'. I have read some complaints the wood is too light-colored but I am very happy with the color. I have no complaints only accolades!
Its the small details folks.
Location: fort worth, tx
Date: October 1, 2020
Disappointed like many others that the color of the wood was so light, almost blonde. Was really looking forward to a dark brown stock for my stainless GB. Another point i was not impressed with , though small, was no stainless steel sling swivel attached. Really folks? At almost 300.00 for the stock you'd think a sling swivel would be attached instead of making us order one. The little details. On the up side.. the craftsmanship was great..fit was tight on all pieces. Stock finish of wood was flawless on mine. Stock unfolded fit comfortably, and allowed easy aquisition of sights. delivery on mine was SUPER FAST. It was on its way within 2 days of putting in order. Dont know if thats the normal or not, but im greatful. Had the stock been a dark wood like puctured on rugers site, and the sling swivel attached i would easily have given my experience 5 stars. I only gave 4 though. Made my stainless mini GB look AMAZING.